TVN 20 - 8/16 IP Channel Network Video Recorder

Available until stock depleted


Technical specs

 Dimensions (W x H x D)
  450mm x 450mm x 95mm
  8-Ch 2TB: 21.98lbs (9.97kgs); 8-Ch 8TB: 26.61lbs (12.07kgs) 16-Ch 4TB: 23.52lbs (10.67kgs); 16-Ch 16TB: 32.78lbs (14.87kgs)
 Input Voltage
  100-240VAC, 6.3A, 50-60Hz
 Power Consumption
  8-Ch 2TB (8-IP Cameras) to 16-Ch 16TB (16 IP Cameras): 29.07W to 57.67W
 Operating Temperature
  32°-104°F (0°-40°C) 10-90% Humidity (non-condensing)
 Hard Drives
  8-Ch: 1, 2, 4 HDD SATA @ 2TB per drive 16-Ch: 2, 4, 8 HDD SATA @ 2TB per drive
  Rack Mount 19 - 2U (rack mount ears included)
Network & Connectors
  10/100/1000 Base-T, RJ-45
 Alarm Input
  16 programmable NO/NC (Rear)
 Alarm Output
  4 Form C Relay (Rear)
  USB 2+, (2) Unit Front – for local archive-off
  Future Use (Rear)
  RJ-45 (Troubleshooting Only)
  Future Use (Rear)
  No Connectors – from IP Camera (record only , if supported)
Video & Record Parameters
 # of Channels
  8 or 16-Channel (based upon model)
 Supported IP Compression
  H.264, MPEG4 (depending on supported IP camera models)
 Supported Resolutions
  QCIF, CIF, DCIF, 2CIF, VGA, 4CIF, SVGA, XGA, HD 720p, 1280x960, SXGA, 1600x912, UXGA, FULL HD 1080p, QXGA, 2560x1920
 Recording Modes
  Continuous, Motion Activated or Scheduled (Motion activated recording based upon internal IP camera activity detection for supported models)
 NVR 20 Operating System
 Health Monitoring
  Various conditions including: HDD Fault/Failure, IP Address Conflicts, IP Camera Off-Line Notification, HDD Read/Write Failures, Network Fault
 User Rights
  3-Levels: Administrator, Operator, Guest
Remote Browser PC Requirements
  Intel E6550 Dual Core 2.33 Ghz, 4MB Cache (Minimum); Intel I5 750 Quad Core 2.66 Ghz, 8MB Cache (Recommended)
  1GB RAM (Minimum) 4GB RAM (Recommended)
 Graphics Card
  HD Video with 256 MB HD Video with 1GB
 Operating System
  Windows 2000, Windows XP, Windows Vista
 Browser Environment
  Internet Explorer 6+(ONLY – Internet Explorer)
  • UltraView IP, TruVision IP and CamPlus 2 IP camera support
  • Supports UltraView Encoder 10 Single Channel H.264 Encoder
  • Various models of H.264 Axis, Arecont, ACTi and other IP camera manufacturers (VGA and Megapixel)
  • Continuous, motion or scheduled recording modes
  • Event recording based upon native IP camera activity detection or via unit alarm input
  • Video is stored in the native IP camera format (no transcoding)
  • Audio recording with capable IP cameras
  • Redundant recording per camera or per hard drive group
  • Compact rack mountable – 2 U
  • Up to 16TB of internal storage front accessible drives
  • GB Ethernet connectivity
  • 16 on-board alarm inputs and 4 configurable alarm outputs
  • Local USB archiving
  • IP Camera auto-discovery support
  • Configuration and viewing via TVN 20 browser or TruVision Navigator software
  • No IP camera licensing

Technical Questions?

For contact details in your country

Click here

Log a support ticket