Home
/Products & Solutions
/Intrusion
DD1012AM - 12 m volumetric Dual Technology/AM motion sensor
Technical specs
- Detection range
- 4, 6, 9, 12 m selectable via dip switches
- Viewing angle
- 78°
- PIR Optics
- 9 high density mirror curtains
- MIcrowave frequency
- 5.8 GHz
- Max. microwave output (at 1m)
- 0.003 µW/cm²
- Memory function
- Yes
- Input power
- 9 to 15 VDC (12V nominal)
- Peak-to-peak ripple immunity
- 2V (at 12 VDC)
- Detector start-up time
- 60 s
- Current consumption
- 10 to 20 mA (10 mA nominal)
- Mounting height
- 1.8 to 3.0 m
- Target speed range
- 0.2 to 3.0 m/s
- Alarm/ Tamper relay characteristic
- NC, 80 mA 30 VDC, Form A
- Fault relay characteristic
- NC, 80 mA 30 VDC, Form A
- Alarm time
- 3 s
- Operating temperature
- -10 to +55° C
- Relative humidity
- 95% max. non-condensing
- Weight
- 120 g
- Dimensions (H x W x D)
- 126 x 63 x 50 mm
- IP/IK rating
- IP30 IK04
- Pry-off tamper
- On board
-
-
- Patented selectable range gated radar technology clearly defining the radar detection border
- PIR technology with patented mirror curtain optics
- Anti-masking variant using Active Infrared and radar technology to protect against sabotage actions outside and inside of the motion sensor
- Intelligent alarm decision based on signal classification of the PIR and radar alarm
- Automatic continuous self diagnostics on all technologies
- Green mode : option to switch off the radar technology when the security system is not armed
- Holding several security approvals including EN Grade III and UL/ULc
